Serial Jet Pump

Range of Performance
Flow rate up to 60L/min (3.6m /h)

Head up to 45 m 

Working Condition

Suction lift up to 9 m

Liquid  temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 6 bar  

Application and Installation

They are recommended for pumping clean water without abrasive particles and liquid that

is chemically non-aggressive to the materials of which the pump is made.

They are suitable for domestic use and in particular for  delivering water in combination with

small pressure sets, as well as for irrigation.

The pumps shall be installed in enclosed places, or  at least protected against inclement weather .

Structure Feature

Pump body: Stainless steel

Motor Bracket: Aluminum

Impeller: POM

Diffuser: Plastic

Motor shaft: SS420 or CS45#

Mechanical seal: Ceramic - Graphite

Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.

Insulation: Class B

Protection: IP 44