WZB And GP Self Priming Pump

Range of Performance

Flow rate up to 60L/min (3.6m /h)

Head up to 65 m 

Working Condition

Suction lift up to 10 m

Liquid  temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 6 bar   

Application and Installation

They are recommended for pumping clean water without abrasive particles and liquid that is chemically non-aggressive to the materials of which the pump is made.  The pump can achieve bigger suction because of  self -priming function so that can be used to deliver water from wells and ponds etc.

The pumps shall be installed in enclosed places, or  at least protected against inclement weather .

Structure Feature

Pump body: Cast  iron

Motor Bracket: Aluminum

Impeller: Brass

Motor shaft: SS420 or CS45#

Mechanical seal: Ceramic - Graphite 

Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.

Insulation: Class B

Protection: IP 44