XPS Serial Shielding Circulation Pump

Range of Performance
Flow rate up to 120L/min (7.2m /h)

Head up to 8 m 

Working Condition

Liquid  temperature: 2 - 110 

Ambient temperature: 2 - 40

The former temperature must be higher than that of the latter so as to avoid short circuit caused by dewing  on the pump body.

Max. Working pressure: 10 bar 

 Application and Installation

The pump can be used to delivery soft water , thin, clean, non-corrosive, non-explosive liquid  without solid granules, fibres and mineral oil for circulation pipeline,  water-heat system and obturation-patterned industrial circulation system.

The pumps shall be installed in enclosed places, or  at least protected against inclement weather .

Structure Feature

Pump body: Cast iron

Motor Bracket: Aluminum

Impeller: Plastic

Motor shaft: Ceramic

Sealed part: Shielding can

Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage  fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.

Insulation: Class H F

Protection: IP44 for XPS3-6, IP42 for XPS7-7